Prof. Dr. PINAR YILGÖR HURİ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Hand-held bioprinters assisting in situ bioprinting

Demir E., Metli S. N., Tutum B. E., Gokyer S., OTO Ç., YILGÖR HURİ P.

Biomedical Materials (Bristol) , cilt.20, sa.2, 2025 (SCI-Expanded)

A hybrid 3D-printed and electrospun bilayer pharmaceutical membrane based on polycaprolactone/chitosan/polyvinyl alcohol for wound healing applications

Mehdikhani M., YILGÖR HURİ P., Poursamar S. A., Etemadi N., Gokyer S., Navid S., et al.

International Journal of Biological Macromolecules , cilt.282, 2024 (SCI-Expanded)

Magnetically Actuated GelMA-Based Scaffolds as a Strategy to Generate Complex Bioprinted Tissues

Ergene E., Liman G., Yılgör Huri P., Demirel G.

Advanced Materials Technologies , cilt.9, sa.17, 2024 (SCI-Expanded)

MgCa-Based Alloys Modified with Zn- and Ga-Doped CaP Coatings Lead to Controlled Degradation and Enhanced Bone Formation in a Sheep Cranium Defect Model

Gokyer S., Monsef Y. A., BÜYÜKSUNGUR S., Schmidt J., Vladescu Dragomir A., Uygur S., et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING , sa.7, ss.4452-4462, 2024 (SCI-Expanded)

Spatial Growth Factor Delivery for 3D Bioprinting of Vascularized Bone with Adipose-Derived Stem/Stromal Cells as a Single Cell Source

Goker M., Derici U. S., Gokyer S., Parmaksiz M. G., Kaya B., Can A., et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING , cilt.10, sa.3, ss.1607-1619, 2024 (SCI-Expanded)

Development of biomaterial-based oxygen transportation vehicles for circulation within blood

Yasar U., Ulusal F., YILGÖR HURİ P., GÜZEL B., DİKMEN N.

Journal of King Saud University - Science , cilt.35, sa.5, 2023 (SCI-Expanded)

Dynamic Tuning of Plasmonic Hot-Spot Generation through Cilia-Inspired Magnetic Actuators

Liman G., Ergene E., Yildiz E., Hukum K. O., YILGÖR HURİ P., Cetin A. E., et al.

ADVANCED INTELLIGENT SYSTEMS , cilt.5, sa.6, 2023 (SCI-Expanded)

In vitro cytotoxicity, corrosion and antibacterial efficiencies of Zn doped hydroxyapatite coated Ti based implant materials

Buyuksungur S., YILGÖR HURİ P., Schmidt J., Pana I., Dinu M., Vitelaru C., et al.

Ceramics International , cilt.49, sa.8, ss.12570-12584, 2023 (SCI-Expanded)

3D printed hydrogel scaffold promotes the formation of hormone-active engineered parathyroid tissue

Yılgör Huri P.

BIOMEDICAL MATERIALS (BRISTOL, ENGLAND) , cilt.1, sa.1, ss.1-10, 2023 (SCI-Expanded)

Zn doped CaP coatings used for controlling the degradation rate of MgCa1 alloy: In vitro anticorrosive properties, sterilization and bacteria/cell-material interactions

Schmidt J., Pana I., Bystrova A., Dinu M., Dekhtyar Y., Vitelaru C., et al.

Colloids and Surfaces B: Biointerfaces , cilt.222, 2023 (SCI-Expanded)

Adjustable bone plate: from bench to operating room

HURİ G., Özdemir E., BİÇER Ö. S., YILGÖR HURİ P., POLAT S., SAPMAZ T., et al.

Turkish Journal of Medical Sciences , cilt.53, sa.5, ss.1379-1386, 2023 (SCI-Expanded)

Biomechanical Strength of Screw Versus Suture Button Fixation in the Latarjet Procedure: A Cadaver Study.

Hakverdiyev Y., McFarland E. G., Kaymakoglu M., Ozdemir E., Akpinar S., Huri P., et al.

Orthopedics , cilt.45, ss.1-5, 2022 (SCI-Expanded)

Basement membrane properties and their recapitulation in organ-on-chip applications

Salimbeigi G., Vrana N. E., Ghaemmaghami A. M., HURİ P., McGuinness G. B.

MATERIALS TODAY BIO , cilt.15, 2022 (SCI-Expanded)

Silver nanowire loaded poly(ε-caprolactone) nanocomposite fibers as electroactive scaffolds for skeletal muscle regeneration

Baştürkmen B., Ergene E., Doğanay D., Yılgör Huri P., Ünalan H. E., Aksoy E. A.

MATERIALS SCIENCE AND ENGINEERING C , cilt.134, sa.1, ss.1-10, 2022 (SCI-Expanded)

3D Printing in Veterinary Medicine

HURİ P., OTO Ç.

ANKARA UNIVERSITESI VETERINER FAKULTESI DERGISI , cilt.69, sa.1, ss.111-116, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Corrosion Resistance and Cytocompatibility of Magnesium-Calcium Alloys Modified with Zinc- or Gallium-Doped Calcium Phosphate Coatings

Tamay D. G., Gokyer S., Schmidt J., Vladescu A., Huri P., Hasirci V., et al.

ACS APPLIED MATERIALS & INTERFACES , cilt.14, sa.1, ss.104-122, 2022 (SCI-Expanded)

3D Printed Biodegradable Polyurethaneurea Elastomer Recapitulates Skeletal Muscle Structure and Function

Gokyer S., Yilgor E., Yilgor I., Berber E., Vrana E., ORHAN K., et al.

ACS Biomaterials Science and Engineering , cilt.7, sa.11, ss.5189-5205, 2021 (SCI-Expanded)

Folding Control of Hydrogel Platforms through Pattern Design and Light Illumination

Ergene E., LİMAN G., Yildiz E., HURİ P., DEMİREL G.

ACS APPLIED POLYMER MATERIALS , cilt.3, sa.7, ss.3272-3277, 2021 (SCI-Expanded)

Recycled algae-based carbon materials as electroconductive 3D printed skeletal muscle tissue engineering scaffolds

Bilge S., Ergene E., Talak E., Gokyer S., DONAR Y. O., SINAĞ A., et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE , cilt.32, sa.7, 2021 (SCI-Expanded)

Facile modification of polycaprolactone nanofibers with egg white protein

Renkler N. Z., Ergene E., Gokyer S., ÖZTÜRK M. T., HURİ P., TUZLAKOĞLU K.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE , cilt.32, sa.4, 2021 (SCI-Expanded)

3D cellular alignment and biomimetic mechanical stimulation enhance human adipose-derived stem cell myogenesis

Ergene E., Bilecen D. S., KAYA B., HURİ P., HASIRCI V. N.

BIOMEDICAL MATERIALS , cilt.15, sa.5, 2020 (SCI-Expanded)

Design of a new dual mesh with an absorbable nanofiber layer as a potential implant for abdominal hernia treatment

Kaya M., Ahi Z. B., Ergene E., HURİ P., TUZLAKOĞLU K.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE , cilt.14, sa.2, ss.347-354, 2020 (SCI-Expanded)

A novel polyurethane-based biodegradable elastomer as a promising material for skeletal muscle tissue engineering

Ergene E., Yagci B. S., Gokyer S., EYİDOĞAN A., AKSOY E. A., HURİ P.

BIOMEDICAL MATERIALS , cilt.14, sa.2, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Engineering Musculoskeletal Tissue Interfaces

Bayrak E., HURİ P.

FRONTIERS IN MATERIALS , cilt.5, 2018 (SCI-Expanded)

Myogenic Differentiation of ASCs Using Biochemical and Biophysical Induction

Huri P., Morrissette-McAlmon J., Grayson W. L.

ADIPOSE-DERIVED STEM CELLS: METHODS AND PROTOCOLS, 2ND EDITION , cilt.1773, ss.123-135, 2018 (SCI-Expanded)

Characterization of a Novel Bioreactor System for 3D Cellular Mechanobiology Studies

Cook C. A., Huri P., Ginn B. P., Gilbert-Honick J., Somers S. M., Temple J. P., et al.

BIOTECHNOLOGY AND BIOENGINEERING , cilt.113, sa.8, ss.1825-1837, 2016 (SCI-Expanded)

Magnetic nanoparticles for in vitro artificial blood development: glutaraldehyde linked hemoglobin molecules

Yasar U., Ulusal F., GÜZEL B., HURİ P., DİKMEN N.

ACTA PHYSIOLOGICA , cilt.217, ss.46, 2016 (SCI-Expanded)

Effect of Culture Conditions on the Multinucleation of Human Adipose-Derived Stem Cells

Huri P.

JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING , cilt.5, sa.3, ss.234-240, 2015 (SCI-Expanded)

Bioreactor Technology for Oral and Craniofacial Tissue Engineering

Huri P., Temple J. P., Hung B. P., Cook C. A., Grayson W. L.

STEM CELL BIOLOGY AND TISSUE ENGINEERING IN DENTAL SCIENCES , ss.117-130, 2015 (SCI-Expanded)

Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds

Temple J. P., Hutton D. L., Hung B. P., Huri P., Cook C. A., Kondragunta R., et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A , cilt.102, sa.12, ss.4317-4325, 2014 (SCI-Expanded)

Multistage Adipose-Derived Stem Cell Myogenesis: An Experimental and Modeling Study

Huri P., Wang A., Spector A. A., Grayson W. L.

CELLULAR AND MOLECULAR BIOENGINEERING , cilt.7, sa.4, ss.497-509, 2014 (SCI-Expanded)

In Vivo Performance of Poly(epsilon-caprolactone) Constructs Loaded with Gentamicin Releasing Composite Microspheres for Use in Bone Regeneration

Sezer U. A., BİLLUR D., HURİ G., HURİ P., AKSOY E. A., Terzioglu H., et al.

JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING , cilt.4, sa.10, ss.786-795, 2014 (SCI-Expanded)

Scaffold pore size modulates in vitro osteogenesis of human adipose-derived stem/stromal cells

Huri P., Ozilgen B. A., Hutton D. L., Grayson W. L.

BIOMEDICAL MATERIALS , cilt.9, sa.4, 2014 (SCI-Expanded)

Proliferation and Differentiation of Mesenchymal Stem Cells in Chitosan Scaffolds Loaded with Nanocapsules Containing Bone Morphogenetic Proteins-4, Platelet-Derived Growth Factor and Insulin-Like Growth Factor 1

Saygun I., Bal V., KIZILTAY A., Huri P., Avcu F., ÜSTÜN K., et al.

JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING , cilt.4, sa.3, ss.181-188, 2014 (SCI-Expanded)

Chitosan-based wet-spun scaffolds for bioactive agent delivery

Ucar S., Yilgor P., Hasirci V., HASIRCI N.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.130, sa.5, ss.3759-3769, 2013 (SCI-Expanded)

An in vivo study on the effect of scaffold geometry and growth factor release on the healing of bone defects

Yilgor P., Yilmaz G., Onal M. B., Solmaz I., Gundogdu S., Keskil S., et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE , cilt.7, sa.9, ss.687-696, 2013 (SCI-Expanded)

Biophysical cues enhance myogenesis of human adipose derived stem/stromal cells

Huri P., Cook C. A., Hutton D. L., Goh B. C., Gimble J. M., DiGirolamo D. J., et al.

BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS , cilt.438, sa.1, ss.180-185, 2013 (SCI-Expanded)

A biomimetic growth factor delivery strategy for enhanced regeneration of iliac crest defects

HURİ P., Huri G., Yasar U., UÇAR Y., DİKMEN N., HASIRCI N., et al.

BIOMEDICAL MATERIALS , cilt.8, sa.4, 2013 (SCI-Expanded)

Effect of double growth factor release on cartilage tissue engineering

Ertan A. B., Yilgor P., Bayyurt B., Calikoglu A. C., Kaspar C., Kök F. N., et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE , cilt.7, sa.2, ss.149-160, 2013 (SCI-Expanded)

Advanced cell therapies with and without scaffolds

Demirbag B., HURİ P., KÖSE G., Buyuksungur A., Hasirci V.

BIOTECHNOLOGY JOURNAL , cilt.6, sa.12, ss.1437-1453, 2011 (SCI-Expanded)

Effect of scaffold architecture and BMP-2/BMP-7 delivery on in vitro bone regeneration

Yilgor P., Sousa R. A., Reis R. L., HASIRCI N., Hasirci V.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE , cilt.21, sa.11, ss.2999-3008, 2010 (SCI-Expanded)

Sequential BMP-2/BMP-7 delivery from polyester nanocapsules

Yilgor P., Hasirci N., Hasirci V.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A , cilt.93A, sa.2, ss.528-536, 2010 (SCI-Expanded)

Incorporation of a sequential BMP-2/BMP-7 delivery system into chitosan-based scaffolds for bone tissue engineering

Yilgor P., Tuzlakoglu K., Reis R. L., HASIRCI N., Hasirci V.

BIOMATERIALS , cilt.30, sa.21, ss.3551-3559, 2009 (SCI-Expanded)

Influence of controlled-pH and uncontrolled-pH operations on recombinant benzaldehyde lyase production by Escherichia coli

ÇALIK P., Yilgor P., Demir A.

ENZYME AND MICROBIAL TECHNOLOGY , cilt.38, sa.5, ss.617-627, 2006 (SCI-Expanded)

Nanobiomaterials: a review of the existing science and technology, and new approaches

Hasirci V., Vrana E., Zorlutuna P., Ndreu A., Yilgor P., Basmanav F. B., et al.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION , cilt.17, sa.11, ss.1241-1268, 2006 (SCI-Expanded)

Oxygen transfer effects on recombinant benzaldehyde lyase production

ÇALIK P., Yilgor P., Ayhan P., Demir A.

CHEMICAL ENGINEERING SCIENCE , cilt.59, sa.22-23, ss.5075-5083, 2004 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Novel electrospun polyvinyl alcohol/chitosan/polycaprolactone-diltiazem hydrochloride nanocomposite membranes for wound dressing applications

Etemadi N., Mehdikhani M., Yılgör Huri P., Poursamar S. A., Rafienia M.

EMERGENT MATERIALS , cilt.7, sa.3, ss.1103-1113, 2024 (ESCI)

Unraveling Endothelial Cell Migration: Insights into Fundamental Forces, Inflammation, Biomaterial Applications, and Tissue Regeneration Strategies

Jerka D., Bonowicz K., Piekarska K., Gokyer S., Derici U. S., Hindy O. A., et al.

ACS APPLIED BIO MATERIALS , cilt.7, sa.4, ss.2054-2069, 2024 (ESCI)

Use of 3D-printed polycaprolactone + hyaluronic acid-based scaffold in orthopedic practice: report of two cases

Yılgör Huri P.

Journal of 3D Printing in Medicine , cilt.7, sa.1, ss.1-10, 2023 (Hakemli Dergi)

Academic Entrepreneurship and Technical Considerations for the Commercialization of Biomaterial-Based Medical Devices

Yılgör Huri P.

Natural and Applied Sciences Journal , cilt.5, sa.1, ss.1-13, 2022 (Hakemli Dergi)

Nanoscale agents within 3D-printed constructs: intersection of nanotechnology and personalized bone tissue engineering

Hindy O. A., Goker M., HURİ P.

EMERGENT MATERIALS , cilt.5, sa.1, ss.195-205, 2022 (ESCI)

Novel additive manufacturing applications for communicable disease prevention and control: focus on recent COVID-19 pandemic

Guvener O., EYİDOĞAN A., OTO Ç., HURİ P.

EMERGENT MATERIALS , cilt.4, sa.1, ss.351-361, 2021 (ESCI)

Bioinks for Bioprinting Tissues and Organs

CAN Y., KARACA R., ÖZBEK F., BOZ G., YILMAZER AKTUNA A., HURİ P.

Natural and Applied Sciences Journal , cilt.3, sa.2, ss.13-33, 2020 (Hakemli Dergi)

3D bioprinting for the endocrine glands

Gokyurek M., Yilmaz K. B., HURİ P.

EMERGENT MATERIALS , cilt.3, sa.4, ss.441-452, 2020 (ESCI)

Role of Biomedical Engineering during COVID-19 Pandemic

ŞAHADA A., TEKİNDOR A. N., ABBADI M. B., MALLUHI M. A., HURİ P.

Natural and Applied Sciences Journal , cilt.3, sa.1, ss.1-16, 2020 (Hakemli Dergi)

Femur boyun kırıklarında kırık lokalizasyonunun instabilite ile ilişkisi: Biyomekanik çalışma

YARADILMIŞ Y. U., Okkaoğlu M. C., HURİ P., EYİDOĞAN A., DEMİRKALE İ., ALTAY M.

Ege Tıp Dergisi , cilt.59, sa.3, ss.160-164, 2020 (Hakemli Dergi)

Epidermal growth factor stimulates rabbit achilles tendon histologically and biomechanically healing

Kocyigit I. A., HURİ G., Yürüker S., Hashemihesar R., HURİ P., Nyland J., et al.

Muscles, Ligaments and Tendons Journal , cilt.10, sa.4, ss.589-602, 2020 (ESCI)

3D-printed surgical guides

Yilmaz A., Badria A. F., HURİ P., HURİ G.

ANNALS OF JOINT , cilt.4, sa.2, 2019 (ESCI)

Infrapatellar fat pad-derived stem cell-based regenerative strategies in orthopedic surgery

HURİ P., Hamsici S., Ergene E., HURİ G., Doral M. N.

Knee Surgery and Related Research , cilt.30, sa.3, ss.179-186, 2018 (Scopus)

Kemik Doku Mühendisliği ve KDM için Kontrollü Salım Sistemleri

HURİ P.

Turkiye Klinikleri Journal of Medical Oncology Special Topics , cilt.8, sa.2, ss.98-103, 2015 (Hakemli Dergi)

Yapay Kan

Yaşar Ü., HURİ P., DİKMEN N.

ARSIV KAYNAK TARAMA DERGISI , cilt.21, sa.2, ss.95-108, 2012 (Hakemli Dergi)

Kemik Doku Mühendisliği

HURİ P., HASIRCI N., HASIRCI V. N.

ARSIV KAYNAK TARAMA DERGISI , cilt.19, sa.4, ss.206-219, 2010 (Hakemli Dergi)

Biomaterials and tissue engineering research in Turkey: The METU biomat center experience

Zorlutuna P., HURİ P., Başmanav F. B., Hasirci V.

Biotechnology Journal , cilt.4, sa.7, ss.965-980, 2009 (Scopus)

Kitaplar

Metrikler

Yayın

146

Atıf (WoS)

1501

H-İndeks (WoS)

Atıf (Scopus)

1784

H-İndeks (Scopus)

Atıf (Scholar)

2617

H-İndeks (Scholar)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim