Yayınlar & Eserler

Yayın Ağı
Makaleler 36
Tümü (36)
SCI-E, SSCI, AHCI (27)
SCI-E, SSCI, AHCI, ESCI (29)
ESCI (2)
Scopus (34)
TRDizin (1)
Diğer Yayınlar (2)

1. Valorization of low-quality recycled concrete aggregates in cement-based systems through carbonation: assessment of engineering performance

Dundar B., SÖNMEZ TUĞLUCA M., İLCAN H., ŞAHİN O., ŞAHMARAN M.
Journal of the Australian Ceramic Society , cilt.61, sa.5, ss.1769-1784, 2025 (SCI-Expanded, Scopus) identifier

2. Life cycle assessment of geopolymer materials utilizing construction and demolition waste

Ünsal Z., Ekinci M. Ö., İLCAN H., ŞAHİN O., Selçuk S., ŞAHMARAN M.
Environmental Research , cilt.285, 2025 (SCI-Expanded) identifier identifier

3. Utilizing bovine carbonic anhydrase II for enzyme-induced carbonate precipitation (EICP) in recycled concrete aggregate

Abdulmajeed Abdulmajeed A. T., Gokoglan H., ÖZDOĞRU E., Erdogan M. K., Yildirim F. N., ŞAHİN ABDULMAJEED S., et al.
Environmental Research , cilt.284, 2025 (SCI-Expanded) identifier identifier

4. Structural performance of pre-fabricated 3D printed concrete walls: Effect of cold joint, axial load and load type

MERCİMEK Ö., ŞAHİN O., ÇELİK A., Özkan Ekinci M., Teksin E., BIÇAKÇIOĞLU K., et al.
JOURNAL OF BUILDING ENGINEERING , cilt.112, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

5. Evaluating sustainable building strategies: Life cycle comparison of demountable and conventional built-environment structures

Khan S. A., İLCAN H., ŞAHİN O., Jassim M., Aminipour E., AKDUMAN Ş., et al.
Cleaner Environmental Systems , cilt.18, 2025 (Scopus) identifier

6. Alkali-Activated Mortars Incorporating Construction and Demolition Waste and Industrial By-products: A Fresh and Hardened State Evaluation

GÜZELKÜÇÜK S., ŞAHİN O., EREN Ş., ULUGÖL H.
GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.38, sa.4, 2025 (ESCI, Scopus, TRDizin)

7. Out-of-plane performance of masonry wallets strengthened with FRP-reinforced prefabricated panels made from construction and demolition waste-based mortars☆

ŞAHİN O., GÜZELKÜÇÜK S., ULUGÖL H., ÖZDOĞRU E., Erdoğan M. K., AKKAYA S. T., et al.
ENGINEERING FAILURE ANALYSIS , cilt.177, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

8. Mechanochemical transformation of waste bricks: A study on grinding optimization and pozzolanic activity

SÖNMEZ TUĞLUCA M., Teksin E., Taj K., ŞAHİN O., İLCAN H., GÜLCAN E., et al.
Powder Technology , cilt.460, 2025 (SCI-Expanded) identifier

9. A comprehensive study on the valorization of recycled concrete aggregates in 3D-printable cementitious systems

Demirbaş A. O., SÖNMEZ TUĞLUCA M., ŞAHİN O., İLCAN H., ŞAHMARAN M.
Structures , cilt.77, 2025 (SCI-Expanded) identifier

10. Reinforcement and modular system for 3DCP geopolymer structures using construction and demolition waste

İLCAN H., Külak A. Y., ŞAHİN O., ALDEMİR A., ŞAHMARAN M., Lachemi M.
Construction and Building Materials , cilt.474, 2025 (SCI-Expanded) identifier

11. Optimizing mechanical performance of geopolymers produced from construction and demolition waste: A comparative study of materials from different origins

KUL A., Ozcelikci E., ÖZEL B. F., İLCAN H., ŞAHİN O., Gunal M. F., et al.
Construction and Building Materials , cilt.426, 2024 (SCI-Expanded) identifier

12. The impact of nozzle diameter and printing speed on geopolymer-based 3D-Printed concrete structures: Numerical modeling and experimental validation

Khan S. A., İLCAN H., Imran R., Aminipour E., ŞAHİN O., Al Rashid A., et al.
Results in Engineering , cilt.21, 2024 (ESCI) identifier

13. Characterization and evaluation of cement-based systems containing solution-treated municipal solid-waste incineration fly ash

Wi K., ŞAHİN O., Wang K., Lee Y.
Construction and Building Materials , cilt.416, 2024 (SCI-Expanded) identifier

14. Buildability analysis on squared profile structure in 3D concrete printing (3DCP)

Imran R., AL RASHİD A., KHAN S. A., İLCAN H., ŞAHİN O., ŞAHMARAN M., et al.
European Journal of Materials , cilt.3, 2023 (Hakemli Dergi)

15. Buildability analysis on effect of structural design in 3D concrete printing (3DCP): An experimental and numerical study

Khan S. A., İLCAN H., Aminipour E., ŞAHİN O., Al Rashid A., ŞAHMARAN M., et al.
Case Studies in Construction Materials , cilt.19, 2023 (SCI-Expanded) identifier

16. Thermal conductivity and electrical resistance of carbon-based cementitious composites

Acikök F., Genç A., Sahin O., Bayer I. R., Ardoa M. K., ŞAHMARAN M.
Magazine of Concrete Research , cilt.76, sa.4, ss.176-187, 2023 (SCI-Expanded) identifier

17. Effects of Treated Waste Wood Fibers Incorporation on Rheological Properties of the Construction and Demolition Waste-based Geopolymer Mortar

İLCAN H., ŞAHİN O., SÖNMEZ TUĞLUCA M., ŞAHMARAN M.
NanoWorld Journal , cilt.9, sa.2, ss.163-169, 2023 (Hakemli Dergi)

18. Effect of industrial waste-based precursors on the fresh, hardened and environmental performance of construction and demolition wastes-based geopolymers

İLCAN H., ŞAHİN O., Unsal Z., Ozcelikci E., KUL A., Cağatay Demiral N., et al.
Construction and Building Materials , cilt.394, 2023 (SCI-Expanded) identifier

19. 3D printing of circular materials: Comparative environmental analysis of materials and construction techniques

Khan S. A., Jassim M., Ilcan H., ŞAHİN O., Bayer İ. R., ŞAHMARAN M., et al.
Case Studies in Construction Materials , cilt.18, 2023 (SCI-Expanded) identifier

20. The effects of various operational- and materials-oriented parameters on the carbonation performance of low-quality recycled concrete aggregate

Dündar B., Tuğluca M. S., İLCAN H., ŞAHİN O., ŞAHMARAN M.
Journal of Building Engineering , cilt.68, 2023 (SCI-Expanded) identifier

21. Construction and demolition waste-based self-healing geopolymer composites for the built environment: An environmental profile assessment and optimization

Mir N., Khan S. A., KUL A., ŞAHİN O., Ozcelikci E., ŞAHMARAN M., et al.
Construction and Building Materials , cilt.369, 2023 (SCI-Expanded, Scopus) identifier identifier

22. Rheological property and extrudability performance assessment of construction and demolition waste-based geopolymer mortars with varied testing protocols

Ilcan H., Şahin O., Kul A., Ozcelikci E., Sahmaran M.
CEMENT AND CONCRETE COMPOSITES , cilt.136, ss.1-15, 2023 (SCI-Expanded) identifier

23. Assessment of the long-term photocatalytic performance of cementitious systems incorporating different mineral admixtures

ŞAHİN O.
Construction and Building Materials , cilt.354, 2022 (SCI-Expanded, Scopus) identifier identifier

24. Renewable energy for carbon footprint reduction of green geopolymers material's production for built-environment

Khan S. A., Mir N., KUL A., ŞAHİN O., ŞAHMARAN M., Koc M.
ENERGY REPORTS , cilt.8, ss.852-858, 2022 (SCI-Expanded, Scopus) identifier identifier

25. Mechanical anisotropy evaluation and bonding properties of 3D-printable construction and demolition waste-based geopolymer mortars

Demiral N. C., Ekinci M. O., ŞAHİN O., İLCAN H., KUL A., YILDIRIM G., et al.
CEMENT & CONCRETE COMPOSITES , cilt.134, 2022 (SCI-Expanded, Scopus) identifier identifier

26. Energy-environmental performance assessment and cleaner energy solutions for a novel Construction and Demolition Waste-based geopolymer binder production process

Khan S. A., Kul A., Şahin O., Şahmaran M., Al-Ghamdi S. G., Koç M.
Energy Reports , cilt.8, ss.14464-14475, 2022 (SCI-Expanded) identifier

27. Life cycle assessment of construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing

MIR N., KHAN S. A., KUL A., ŞAHİN O., ŞAHMARAN M., KOÇ M.
CIRUGIA ESPAÑOLA (ENGLISH EDITION) , cilt.10, 2022 (Scopus) Sürdürülebilir Kalkınma identifier

28. Life cycle assessment of binary recycled ceramic tile and recycled brick waste-based geopolymers

Mir N., Khan S. A., KUL A., ŞAHİN O., Lachemi M., ŞAHMARAN M., et al.
Cleaner Materials , cilt.5, 2022 (Scopus) identifier

29. Rheological properties and compressive strength of construction and demolition waste-based geopolymer mortars for 3D-Printing

İLCAN H., Sahin O., KUL A., YILDIRIM G., ŞAHMARAN M.
CONSTRUCTION AND BUILDING MATERIALS , cilt.328, 2022 (SCI-Expanded, Scopus) identifier identifier

30. Role of inclusion size distribution of titanium dioxide on the nitrogen oxides reduction capability and microstructural characteristics of cementitious systems

Bahsi E., Sahin O., İLCAN H., UZAL B., Gunal M. F., YILDIRIM G., et al.
CONSTRUCTION AND BUILDING MATERIALS , cilt.318, 2022 (SCI-Expanded, Scopus) identifier identifier

31. Construction and demolition waste-based geopolymers for built-environment: An environmental sustainability assessment

MIR N., KHAN S. A., KUL A., ŞAHİN O., ŞAHMARAN M., KOÇ M.
MATERIALS TODAY : PROCEEDINGS , cilt.70, ss.358-362, 2022 (Scopus) identifier

32. Construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing

Sahin O., İLCAN H., Atesli A. T., KUL A., YILDIRIM G., ŞAHMARAN M.
CEMENT & CONCRETE COMPOSITES , cilt.121, 2021 (SCI-Expanded, Scopus) identifier identifier

33. Influence of mixing methods on the NOx reduction capability and electrical properties of photocatalytic cementitious systems

Sahin O., Bay S., Ilcan H., Yildirim G., ŞAHMARAN M.
CEMENT & CONCRETE COMPOSITES , cilt.115, 2021 (SCI-Expanded, Scopus) identifier identifier

34. Effects of Mixture Design Parameters on the Mechanical Behavior of High-Performance Fiber-Reinforced Concretes

ERDEM T. K., DEMİRHAN S., Yildirim G., Banyhussan Q. S., Sahin O., Balav M. H., et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.32, sa.12, 2020 (SCI-Expanded, Scopus) identifier identifier identifier

35. Performance of engineered cementitious composites under drop-weight impact: Effect of different mixture parameters

Yildirim G., Khiavi F. E., ANIL Ö., Sahin O., ŞAHMARAN M., Tugrul Erdem R.
STRUCTURAL CONCRETE , cilt.21, sa.3, ss.1051-1070, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

36. Electrical Testing for the Assessment of Self-healing and Self-sensing Capability of Cementitious Composites

ŞAHİN O., YILDIRIM G., ŞAHMARAN M.
INDIAN CONCRETE JOURNAL , cilt.93, ss.39-46, 2019 (Scopus) identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 12

1. Fire Resistance Properties of Geopolymer Binders Incorporating Construction and Demolition Waste and Slag

ULUGÖL H., GÜZELKÜÇÜK S., ERDOĞAN M. K., ŞAHİN O.
2nd International Symposium on Innovations in Civil Engineering and Technology, Isparta, Türkiye, 30 Ekim - 01 Kasım 2024, (Tam Metin Bildiri)

2. İNŞAAT VE YIKINTI ATIKLARININ YÜKSEK KATMA DEĞERLİ OLARAK İNŞAAT SEKTÖRÜNE YENİDEN KAZANDIRILMASI

Şahmaran M., İlcan H., Şahin O.
2023 HAZIR BETON FUARI VE KONGRESİ, İstanbul, Türkiye, 8 - 10 Kasım 2023, ss.1-5, (Tam Metin Bildiri)

3. Investigating the Effects of Chemical Waterproofing Agent Application Techniques on the Permeability of Concrete Specimens

ŞAHİN O.
3rd Global Conference on Engineering Research (GLOBCER'23), Türkiye, 13 - 16 Eylül 2023, ss.532, (Özet Bildiri)

4. Investigating the Influence of TiO2 Substitution Rate on Photocatalytic Activity of Cement-Based Systems

ŞAHİN O.
11th International Congress on Engineering, Architecture and Design, İstanbul, Türkiye, 10 - 12 Haziran 2023, ss.1453, (Özet Bildiri)

5. Investigation of the Properties of Geopolymer Mortars Produced with the Construction and Demolition Waste

İLCAN H., ŞAHİN O., AMİNİPOUR E., ŞAHMARAN M.
The International RILEM Conference on Synergising expertise towards sustainability and robustness of cement-based materials and concrete structures (SynerCrete'2023), MILOS, Yunanistan, 14 - 16 Haziran 2023, cilt.44, ss.337-349, (Tam Metin Bildiri)

6. Effects of Treated Waste Wood Fibers Incorporation on Rheological Properties of the Construction and Demolition Waste-based Geopolymer Mortar

İLCAN H., ŞAHİN O., SÖNMEZ TUĞLUCA M., ŞAHMARAN M.
4th International Congress on Materials & Structural Stability (CMSS2023), Rabat, Malta, 8 - 10 Mart 2023, (Tam Metin Bildiri)

7. Effect of Light-source on the Photocatalytic Degradation Capability of TiO2-incorporated Cementitious Composites

ŞAHİN O., HATEM M., Bahşi E., BAYER İ. R.
4th International Conference on Advanced Engineering Technologies (ICADET 2022), Bayburt, Türkiye, 28 - 30 Eylül 2022, ss.200, (Özet Bildiri)

8. Utilization of Calcined VolcanicTuff in the Production of Geopolymer Composites

ÖKSÜZER N., HATEM M., ŞAHİN O.
4th International Conference on Advanced Engineering Technologies (ICADET 2022), Bayburt, Türkiye, 28 - 30 Eylül 2022, (Özet Bildiri)

9. Characterization of Fresh State Properties of Construction and Demolition Waste-based Geopolymer for Numerical Modelling and Simulation

İLCAN H., KHAN S. A., ŞAHİN O., KOÇ M., ŞAHMARAN M.
The 4th International Conference of Materials and Engineering Technology, Türkiye, 8 - 10 Eylül 2022, (Özet Bildiri)

10. The buildability performance of construction demolition waste-based geopolymeric binder

ŞAHİN O., KUL A., YILDIRIM G., ŞAHMARAN M.
International Conference on Cement - Based Materials Tailored for a Sustainable Future, İstanbul, Türkiye, 27 Mayıs 2021, cilt.1, ss.376-388, (Tam Metin Bildiri)

11. Sürdürülebilir Yapılaşma Çerçevesinde 3 Boyutlu Eklemeli Beton İmalatı” International Conference on Innovation

ŞAHMARAN M., Bahşi E., ŞAHİN O.
Sustainability, Technology and Education in Civil Engineering, 13 - 15 Haziran 2019, (Tam Metin Bildiri)

12. Maksimum Deprem Parametrelerinin Yapıların Kalıntı Deplasman Talepleri Üzerindeki Etkisi

ŞAHİN O., DURUCAN C., AY Z.
II. International Scientific and Vocational Studies Congress, Nevşehir, Türkiye, 5 - 08 Temmuz 2018, (Özet Bildiri)
Kitaplar 1

1. Nano-tailored TiO2-based photocatalytic cementitious systems for NOx reduction and air cleaning

ŞAHİN O., Bahşi E., YILDIRIM G., ŞAHMARAN M.
Recent Advances in Nano-Tailored Multi-Functional Cementitious Composites, , Editör, Woodhead Publishing Series in Civil and Structural Engineering, ss.161-208, 2022