Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Optimized CFD modelling and validation of radiation section of an industrial top-fired steam methane reforming furnace

Tutar M., Ustun C. E., Campillo-Robles J. M., Fuente R., Cibrian S., Arzua I., et al.
COMPUTERS & CHEMICAL ENGINEERING , cilt.155, 2021 (SCI-Expanded) identifier identifier

Computational modeling of axial rotation for the evolution of temperature in horizontal toroidal cans under pasteurization conditions

Erdoğdu F., Topcam H., Altin O., Karatas O., Sarghini F., Tokur B., et al.
FOOD AND BIOPRODUCTS PROCESSING , cilt.130, ss.106-120, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Effects of viscosity and agitation rate on temperature and flow field in cans during reciprocal agitation

ERDOĞDU F., Tutar M., Sarghini F., Skipnes D.
JOURNAL OF FOOD ENGINEERING , cilt.213, ss.76-88, 2017 (SCI-Expanded) identifier identifier

Determining the optimal shaking rate of a reciprocal agitation sterilization system for liquid foods: A computational approach with experimental validation

ERDOĞDU F., Tutar M., Oines S., Barreno I., Skipnes D.
FOOD AND BIOPRODUCTS PROCESSING , cilt.100, ss.512-524, 2016 (SCI-Expanded) identifier identifier

Adaptive coatings based on polyaniline for direct 2D observation of diffusion processes in microfluidic systems

Florea L., Martin-Mayor A., Mounir Bou-Ali M., Meagher K., Diamond D., Tutar M., et al.
SENSORS AND ACTUATORS B-CHEMICAL , cilt.231, ss.744-751, 2016 (SCI-Expanded) identifier identifier

Experimental study on performance assessment of Savonius rotor type wave energy converter in an experimental wave flume

Tutar M., Veci I.
IET RENEWABLE POWER GENERATION , cilt.10, sa.4, ss.541-550, 2016 (SCI-Expanded) identifier identifier

Performance analysis of a horizontal axis 3-bladed Savonius type wave turbine in an experimental wave flume (EWF)

Tutar M., Veci I.
RENEWABLE ENERGY , cilt.86, ss.8-25, 2016 (SCI-Expanded) identifier identifier

LES study of grid-generated turbulent inflow conditions with moderate number of mesh cells at low Re numbers

Torrano I., Martinez-Agirre M., Tutar M.
INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS , cilt.30, sa.2, ss.141-154, 2016 (SCI-Expanded) identifier identifier

Experimental wave flume study of Savonius-type multiple rotor arrays

Tutar M., Veci I.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY , cilt.7, sa.6, 2015 (SCI-Expanded) identifier identifier

Numerical correlation for the pressure drop in Stirling engine heat exchangers

Barreno I., Costa S. C., Cordon M., Tutar M., Urrutibeascoa I., Gomez X., et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.97, ss.68-81, 2015 (SCI-Expanded) identifier identifier

Comparison of Experimental and RANS-Based Numerical Studies of the Decay of Grid-Generated Turbulence

Torrano I., Tutar M., Martinez-Agirre M., Rouquier A., Mordant N., Bourgoin M.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.137, sa.6, 2015 (SCI-Expanded) identifier identifier

The thermal non-equilibrium porous media modelling for CFD study of woven wire matrix of a Stirling regenerator

Costa S. C., Barreno I., Tutar M., Esnaola J. A., Barrutia H.
ENERGY CONVERSION AND MANAGEMENT , cilt.89, ss.473-483, 2015 (SCI-Expanded) identifier identifier

Numerical study of polymer melt flow in a three-dimensional sudden expansion: viscous dissipation effects

Tutar M., KARAKUŞ A.
JOURNAL OF POLYMER ENGINEERING , cilt.34, sa.8, ss.755-764, 2014 (SCI-Expanded) identifier identifier

Experimental and numerical flow investigation of Stirling engine regenerator

Costa S., Tutar M., Barreno I., Esnaola J., Barrutia H., Garcia D., et al.
ENERGY , cilt.72, ss.800-812, 2014 (SCI-Expanded) identifier identifier

Numerical study of the heat transfer in wound woven wire matrix of a Stirling regenerator

Costa S. C., Barrutia H., Ander Esnaola J., Tutar M.
ENERGY CONVERSION AND MANAGEMENT , cilt.79, ss.255-264, 2014 (SCI-Expanded) identifier identifier

Effects of mesh refinement, time step size and numerical scheme on the computational modeling of temperature evolution during natural-convection heating

Boz Z., ERDOĞDU F., Tutar M.
JOURNAL OF FOOD ENGINEERING , cilt.123, ss.8-16, 2014 (SCI-Expanded) identifier identifier

Computational study of a small scale vertical axis wind turbine (VAWT): comparative performance of various turbulence models

Aresti L., Tutar M., Chen Y., Calay R. K.
WIND AND STRUCTURES , cilt.17, sa.6, ss.647-670, 2013 (SCI-Expanded) identifier

A numerical study of solidification and viscous dissipation effects on polymer melt flow in plane channels

Tutar M., KARAKUŞ A.
JOURNAL OF POLYMER ENGINEERING , cilt.33, sa.2, ss.95-110, 2013 (SCI-Expanded) identifier identifier

Numerical study of the pressure drop phenomena in wound woven wire matrix of a Stirling regenerator

Costa S. C., Barrutia H., Ander Esnaola J., Tutar M.
ENERGY CONVERSION AND MANAGEMENT , cilt.67, ss.57-65, 2013 (SCI-Expanded) identifier identifier

Computational Modeling of the Effects of Viscous Dissipation on Polymer Melt Flow Behavior During Injection Molding Process in Plane Channels

Tutar M., KARAKUŞ A.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME , cilt.135, sa.1, 2013 (SCI-Expanded) identifier identifier

Numerical simulation for heat transfer and velocity field characteristics of two-phase flow systems in axially rotating horizontal cans

Tutar M., ERDOĞDU F.
JOURNAL OF FOOD ENGINEERING , cilt.111, sa.2, ss.366-385, 2012 (SCI-Expanded) identifier identifier

A computational study for axial rotation effects on heat transfer in rotating cans containing liquid water, semi-fluid food system and headspace

ERDOĞDU F., Tutar M.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.55, sa.13-14, ss.3774-3788, 2012 (SCI-Expanded) identifier identifier

Computational modelling of inflow turbulence effects on transitional flow in a highly transonic linear turbine

Tutar M., Sonmez U.
INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW , cilt.22, sa.8, ss.1096-1119, 2012 (SCI-Expanded) identifier identifier

Velocity and Temperature Field Characteristics of Water and Air during Natural Convection Heating in Cans

ERDOĞDU F., Tutar M.
JOURNAL OF FOOD SCIENCE , cilt.76, sa.1, 2011 (SCI-Expanded) identifier identifier identifier

Computational Study of the Effect of Governing Parameters on a Polymer Injection Molding Process for Single-Cavity and Multicavity Mold Systems

Tutar M., KARAKUŞ A.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME , cilt.132, sa.1, 2010 (SCI-Expanded) identifier identifier

THE COMPUTATIONAL MODELING OF TRANSITIONAL FLOW THROUGH A TRANSONIC LINEAR TURBINE: COMPARATIVE PERFORMANCE OF VARIOUS TURBULENCE MODELS

Tutar M., Sonmez U.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS , cilt.58, sa.5, ss.403-427, 2010 (SCI-Expanded) identifier identifier

3-D Computational Modelling of Process Condition Effects on Polymer Injection Molding

Tutar M., KARAKUŞ A.
INTERNATIONAL POLYMER PROCESSING , cilt.24, sa.5, ss.384-398, 2009 (SCI-Expanded) identifier

INJECTION MOLDING SIMULATION OF A COMPRESSIBLE POLYMER

Tutar M., KARAKUŞ A.
JOURNAL OF POLYMER ENGINEERING , cilt.29, sa.6, ss.355-383, 2009 (SCI-Expanded) identifier identifier

Computational modeling of airflow patterns and heat transfer prediction through stacked layers' products in a vented box during cooling

Tutar M., ERDOĞDU F., Toka B.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , cilt.32, sa.2, ss.295-306, 2009 (SCI-Expanded) identifier identifier

Large eddy simulation of a square cylinder flow: Modelling of inflow turbulence

Tutar M., Celik I.
WIND AND STRUCTURES , cilt.10, sa.6, ss.511-532, 2007 (SCI-Expanded) identifier identifier

Modeling of effect of inflow turbulence data on large eddy simulation of circular cylinder flows

Tutar M., Celik I., Yavuz I.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.129, sa.6, ss.780-790, 2007 (SCI-Expanded) identifier identifier

Computational modeling of wind flow around a group of buildings

Tutar M., Oguz G.
INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS , cilt.18, sa.8, ss.651-670, 2004 (SCI-Expanded) identifier identifier

Numerical analysis of fluid flow and heat transfer characteristics in three-dimensional plate fin-and-tube heat exchangers

Tutar M., Akkoca A.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS , cilt.46, sa.3, ss.301-321, 2004 (SCI-Expanded) identifier identifier

Large eddy simulation of wind flow around parallel buildings with varying configurations

Tutar M., Oguz G.
FLUID DYNAMICS RESEARCH , cilt.31, sa.5-6, ss.289-315, 2002 (SCI-Expanded) identifier identifier identifier

Computational modelling of flow around a circular cylinder in sub-critical flow regime with various turbulence models

Tutar M., Holdo A.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS , cilt.35, sa.7, ss.763-784, 2001 (SCI-Expanded) identifier identifier

Large eddy simulation of a smooth circular cylinder oscillating normal to a uniform flow

Tutar M., Holdo A.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.122, sa.4, ss.694-702, 2000 (SCI-Expanded) identifier identifier

Application of differing forcing function models on simulated flow past an oscillating cylinder in a uniform low Reynolds number flow

Tutar M., Holdo A.
INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS , cilt.11, sa.3-4, ss.223-235, 1999 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Modelling of effect of inflow turbulence on large eddy simulation of bluff body flows

Tutar M., Celik I., Yavuz I.
Mathematical and Computational Applications , cilt.11, sa.3, ss.225-234, 2006 (Scopus) identifier

A numerical study of heat transfer and fluid flow in a plate fin- and- tube heat exchanger

Tutar M., Akkoca A., Oztekin S.
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP , cilt.431, ss.77-84, 2000 (Scopus) identifier

The role of the wall function in Large Eddy Simulations of bluff body flows

Wakes S., Holdo A., Tutar M.
Proceedings of the 1999 3rd ASME/JSME Joint Fluids Engineering Conference, FEDSM'99, San Francisco, California, USA, 18-23 July 1999 (CD-ROM) , ss.1, 1999 (Scopus) identifier

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

EFFECT OF LIQUID VISCOSITY ON THE TEMPERATURE EVOLUTION DURING AXIAL ROTATION OF TOROIDAL CANS: A COMPUTATIONAL FORCE ANALYSIS

Erdoğdu F., Topcam H., Altin O., Karatas O., Sarghini F., Tutar M.
12th International Conference on Simulation and Modelling in the Food and Bio-Industry, FOODSIM 2022, Ghent, Belçika, 3 - 06 Nisan 2022, ss.86-90 identifier

Computational Performance Analysis of a Rotary Type Tri-Rotor Air Compressor Undergoing a Polytropic Process

Tutar M., Üstün C. E., Mutlu H.
19th Conference on Thermal Science and Engineering of Serbia, Nish, Sırbistan, 22 - 25 Ekim 2019, cilt.1, ss.609-621

Sustainability in the vegetable food supply chain -overview of the results of the project SUNNIVA

Lovdal T., ERDOĞDU F., Droogenbroeck B. v., A Vagen V., Bartoszek A. B., Vos C. V., et al.
31st Effost International Conference, 13 - 16 Kasım 2017

A performance study of a horizontal-axis micro-turbine in a numerical wave flume

Tutar M., Mendi M.
Conference on Sustainable Solutions for Energy and Environment (EENVIRO), Bucharest, Romanya, 26 - 28 Ekim 2016, cilt.112, ss.83-91 identifier identifier

Computational Determination of Viscosity and Agitation Rate Effects during Reciprocal Agitated Retort Processing

Erdogdu F., TUTAR M., Oines S., Barreno I., Skipnes D., Lovdal T.
4th ISEKI Food Conference, 6 - 08 Temmuz 2016

Optimization of a thermal p rocess with reciprocal agitation by computational modelling

Skipnes D., ERDOĞDU F., Tutar M., Øines S., Barreno I., Løvdal T.
9th International Conference on Simulation and Modelling in the Food and Bio-Industry, FOODSIM 2016, Ghent, Belçika, 3 - 07 Nisan 2016, ss.149-151 identifier

Computational modelling of reciprocal agitation retort process for canned liquid foods

Erdogdu F., Tutar M., Barreno I., Skipnese D., Oinese S., Lovdale T.
29th Effost International Conference, Athens, Yunanistan, 10 - 11 Ekim 2015, cilt.1, ss.388-395

Self Powered High Flow Capacity Polymeric Microfluidics

Ruiz I., Veci I., Tijero M., Valero A., Etxebarria J., Berganzo J., et al.
19th Int. Conference on Miniaturized Systems for Chemistry and Life Sciences- MicroTas 2015, Seul, Güney Kore, 25 - 29 Ekim 2015, ss.1359-1362

A study of energy conversion efficiency of a savonius type wave energy converter system

Tutar M., Erdem C.
1st International Congress on Energy Efficiency and Energy Related Materials, ENEFM 2013, Antalya, Türkiye, 9 - 12 Ekim 2013, cilt.155, ss.287-293 identifier

Numerical characterization of pressure drop through a low speed wind tunnel: Some design aspects

Torrano I., Martinez-Agirre M., Tutar M.
1st International Renewable and Sustainable Energy Conference (IRSEC), Ouarzazate, Fas, 7 - 09 Mart 2013, ss.240-245 identifier identifier

COMPUTATIONAL MODELLING OF TWO-PHASE FLOW AROUND A SAVONIUS TYPE WAVE ENERGY CONVERTER IN A TWO-DIMENSIONAL NUMERICAL WAVE TANK

Tutar M., Erdem C.
5th International Conference on Computational Methods in Marine Engineering, Hamburg, Almanya, 29 - 31 Mayıs 2013, ss.622-633 identifier identifier

A study analysis for a self excited induction generator for a sea wave energy extraction application

Buldu G., CANBOLAT H., Tutar M., Ali M. B.
11th International Conference on Electrical Power Quality and Utilisation, EPQU 2011, Lisbon, Portekiz, 17 - 19 Ekim 2011, ss.722-727 identifier

The design of a palette-type wave energy converter system supported by Buoys

Buldu G., CANBOLAT H., Tutar M.
2011 10th International Conference on Environment and Electrical Engineering, EEEIC.EU 2011, Rome, İtalya, 8 - 11 Mayıs 2011 identifier

The role of inflow turbulence for large eddy simulation on modelling of bluff body flows

Tutar M., Celik I., Yavuz I.
2004 ASME Heat Transfer/Fluids Engineering Summer Conference, HT/FED 2004, Charlotte, NC, Amerika Birleşik Devletleri, 11 - 15 Temmuz 2004, cilt.2 A, ss.451-460 identifier

Large eddy simulation of single offshore riser oscillating normal and uniform flow: Comparison between two dimensional and three dimensional results

Holdø A. E., Tutar M.
Emerging Technologies in Fluids, Structures, and Fluid/Structure Interactions - 1999 (The ASME Pressure Vessels and Piping Conference), Boston, MA, USA, 1 - 05 Ağustos 1999, cilt.396, ss.333-341 identifier

Comparative performance of various two equation turbulence models and LES on simulated flow past a circular cylinder in subcritical flow regime

Tutar M., Holdo A. E., Lewis A. P.
Proceedings of the 1998 ASME Fluids Engineering Division Summer Meeting, Washington, Kiribati, 21 - 25 Haziran 1998 identifier

Application of differing forcing function models on the flow past an oscillating cylinder in a uniform low reynolds number flow

Tutar M., Holdø A.
International Symposium on Advances in Computational Heat Transfer, CHT 1997, Çeşme, Türkiye, 26 - 30 Mayıs 1997 identifier

Metrikler

Yayın

57

Atıf (WoS)

713

H-İndeks (WoS)

15

Atıf (Scopus)

834

H-İndeks (Scopus)

16

Proje

17

Tez Danışmanlığı

4
BM Sürdürülebilir Kalkınma Amaçları