Akademik Veri Yönetim Sistemi
Revista de Chimie, cilt.71, sa.6, ss.51-58, 2020 (SCI-Expanded)
© 2020 SYSCOM 18 S.R.L.. All rights reserved.Since their exceptional rheological behavior, bentonite suspensions are widely used in engineering, industrial, agricultural, and drilling applications. So, the aim of the present study is to investigate the rheological properties of three types aqueous suspensions prepared with calcium bentonite (CaB), sodium bentonite (NaB) obtained from that by Na2CO3activation, and NaB with the excess soda. The CaB taken from Giresun/Turkey region contains calcium smectite (CaxS) as clay mineral and opal CT (SiO2.nH2O) as impurity which is paracrystalline silica. Soda content by the activation and bentonite content in the suspension were changed in the interval of 2.5-15.0% and 5-20% by mass, respectively. CaxS completely converted to sodium smectite (Na2xS) by the activation with the soda content of 2.5% and then Na2xS+Na2CO3mixtures formed. Rheological properties of these aqueous suspensions were measured using a Fann Viscometer. These properties reached their maxima by the most thixotropic Na2xS suspensions and greatly increased with the increasing of smectite content. Rheological plots drawn of the shear rate vs. shear stress in the interval of 170-1020 s-1showed that the suspensions flow as a Bingham Plastic. Change in rheological properties depending on the smectite type and content as well as excess soda content was explained thermodynamically based on the chemical potential gradient between interlayer and dispenser waters.