Akademik Veri Yönetim Sistemi
NUCLEAR ENGINEERING AND TECHNOLOGY, cilt.58, sa.5, 2026 (SCI-Expanded, Scopus)
The study aims to present the dosimetric properties of a novel line Pr-142 beta-emitting source in an organ-specific prostate phantom for its potential use in prostate brachytherapy. The line Pr-142 sources containing in capillary glass tubes, were produced through Pr-141(n,gamma)Pr-142 reaction at a thermal neutron flux of 2.5x10(12) n & centerdot;cm(-2)& centerdot;s(-1) in a 250 kW Triga Mark II research reactor. Each tube containing similar to 100 mg Pr-141 (100%), when irradiated for 25 min, resulted in a dose rate of similar to 2 Gy/h suitable for brachytherapy, even after a decay time of 10-12 h. Dosimetric characterization of line Pr-142 sources were performed in terms of source strength, non-uniformity and active source length according to NCS-14, ICRU-72, and AAPM TG-60/TG-149 protocols by using EBT3 radiochromic film and ExradinW1 plastic scintillator detector (PSD). Measurements were conducted both in free-air and in water-equivalent solid phantoms, followed by dose mapping in a patient-specific, 3D printed anthropomorphic pelvic phantom representing prostate (target), bladder, and rectum (organs-at-risk). Although it does not exactly represent a brachytherapy treatment case, the dosimetric results indicate that line Pr-142 sources can be used in brachytherapy applications at least as a medium-dose-rate brachytherapy source. The produced novel line Pr-142 beta sources exhibited low dose non-uniformities (0.8-3.7%) and source strengths of approx. 2-3 Gy/h at 10 h post-production. Dose profiles obtained on the prostate phantom indicated a steep beta dose fall-off and favorable dose distributions at OARs. The overall results indicate that line Pr-142 beta sources meet the essential dosimetric requirements for brachytherapy sources, and it may serve as a promising candidate for future interstitial prostate applications, pending further pre-clinical evaluation.