Template assisted synthesis of photocatalytic titanium dioxide nanotubes by hot filament chemical vapor deposition method

Creative Commons License

KARAMAN M., Sariipek F., KÖYSÜREN Ö., Yildiz H. B.

APPLIED SURFACE SCIENCE, cilt.283, ss.993-998, 2013 (SCI-Expanded) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 283
  • Basım Tarihi: 2013
  • Doi Numarası: 10.1016/j.apsusc.2013.07.058
  • Dergi Adı: APPLIED SURFACE SCIENCE
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.993-998
  • Anahtar Kelimeler: Chemical vapor deposition, Titanium dioxide, Photocatalysis, TIO2 THIN-FILMS, ARRAYS
  • Ankara Üniversitesi Adresli: Hayır

Özet

Titanium dioxide thin films were deposited conformally over electrospun polymethyl methacrylate (PMMA) fibers by hot filament chemical vapor deposition method. Deposition rates were observed to be very high to allow for rapid coatings. Thermal annealing of as deposited materials leads the clean decomposition of the polymeric inner layer and formation of randomly distributed anatase TiO2 nanotubes. Nanotubular TiO2 structure was clearly identified by SEM and that structure is ideal for good photocatalytic activity because of its high surface area per unit volume ratio. FTIR and XPS results show the formation of stoichiometric TiO2, and the crystalline form of the final nanotubes was found to be anatase (1 0 1) after XRD analysis. High photocatalytic activity of TiO2 nanotubes under UV irradiation was observed with an apparent rate constant of 0.74 h(-1) for methyl orange decomposition. (C) 2013 Elsevier B.V. All rights reserved.