Pneumatic conveying characteristics of cotton seeds


Creative Commons License

Kilickan A., Güner M.

BIOSYSTEMS ENGINEERING, cilt.95, sa.4, ss.537-546, 2006 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 95 Sayı: 4
  • Basım Tarihi: 2006
  • Doi Numarası: 10.1016/j.biosystemseng.2006.08.015
  • Dergi Adı: BIOSYSTEMS ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.537-546
  • Ankara Üniversitesi Adresli: Evet

Özet

The pneumatic conveying characteristics of definted and fuzzy cotton seeds (Gossypium hisutum L.) of Gulerbey and Nazilli 84 S varieties were determined. The length, width, thickness, arithmetic mean diameter, geometric mean diameter, sphericity, volume, 1000 seed mass, bulk density, true density, porosity., projected area, terminal velocity, drag coefficient, pressure drop, power consumption, and seed damage, namely mechanical damage, germination test, and seed vigour were investigated experimentally. The positive low-pressure system was used for conveying of cotton seeds. The length, width, thickness, arithmetic mean diameter, geometric mean diameter, sphericity, Volume, 1000 seed mass, bulk density, true density, porosity, projected area, terminal velocity, and drag coefficient ranged from 9.06 to 10.89 mm, 4.73 to 5.88 mm, 4.23 to 5.15 mm, 5.74 to 7.31 mm, 5.82 to 6.89 mm, 61.37 to 64.03%, 95.11 to 121.40 mm(3), 106.50 to 126.50 g, 296 to 632.10 kg m(-3), 1000 to 1075 kg m(-3), 41.20% to 71.59%, 31.90 to 52.70 mm(2), 8.12 to 11.31 m s(-1), and 0.462 to 0.684, respectively. The power requirement and pressure drop increased with increase in air velocity and decreased with increase in pipe diameter. As the conveying capacity increased, the power requirement and pressure drop increased. The highest pressure drop and power requirement were obtained for Gurelbey (delinted) and Nazilli 84 S (delinted) varieties, while the lowest pressure drop was found for Nazilli 84 S (fuzzy) and Gurelbey, (fuzzy). The mechanical damage to the cotton seed for all varieties increased as the air velocity increased. The average values of germination and vigour index for all varieties Lit the inside pipe diameters of 43.1 mm and 70.3 mm decreased after pneumatic conveying. After conveying the germination and vigour index of Nazilli 84 S (delinted) decreased from 92% and 2.32 cm to 28% and 1.10 cm for 44.43 m s(-1) at the inside pipe diameters of 43.1 mm. (c) 2006 IAgrE. All rights reserved. Published by Elsevier Ltd.