Development of a Low Density Calibration Source Prepared with Polyurethane Foam for HPGe Detector Gamma-Ray Spectrometry
NUCLEAR ENGINEERING AND TECHNOLOGY, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Basım Tarihi: 2026
- Doi Numarası: 10.1016/j.net.2026.104843
- Dergi Adı: NUCLEAR ENGINEERING AND TECHNOLOGY
- Derginin Tarandığı İndeksler: Scopus, Science Citation Index Expanded (SCI-EXPANDED), INSPEC, Directory of Open Access Journals
- Ankara Üniversitesi Adresli: Evet
Özet
Stable, low-density reference materials are important for gamma-ray spectrometric measurements of low-density materials, particularly when conventional solid matrices or gaseous standards are unavailable or impractical. In this study, a low-density solid reference material was prepared by incorporating 0.2 g of BL-5, a Canadian Certified Reference Material for uranium ore, into a two-component, rapid-curing rigid polyurethane (PU) foam matrix. Three nominally identical samples were prepared to evaluate reproducibility. The cured PU foam had a density of approximately 0.130 g·cm-3. Gamma-ray measurements were performed using a 78.5 % relative-efficiency n-type HPGe detector. Full-energy peak efficiencies were determined using a CBSS-2 volumetric multi-gamma reference source and transferred to the PU foam-BL-5 matrix by correcting for differences in photon attenuation. Self-attenuation corrections were calculated using NIST XCOM data, while true coincidence summing corrections were obtained with EFFTRAN. The experimental configuration was independently validated using RayXpert Monte Carlo simulations. The mean measured activities of 238U, 210Pb, and 226Ra were 170± 10, 181 ± 6, and 174 ± 5 Bq, respectively, demonstrating excellent preparation reproducibility. These results indicate that rigid PU foam is a promising stable, substantially lower-density matrix for gamma-ray spectrometric reference materials.