Eğitim Bilgileri
2022 - 2023
2022 - 2023Post Doktora
Iowa State University, Department of Civil, Construction and Environmental Engineering, Amerika Birleşik Devletleri
2018 - 2021
2018 - 2021Doktora
Hacettepe Üniversitesi, Fen Bilimleri Enstitüsü, Türkiye
2016 - 2018
2016 - 2018Yüksek Lisans
Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Türkiye
2011 - 2016
2011 - 2016Lisans
Ege Üniversitesi, Türkiye
Yaptığı Tezler
2021
2021Doktora
Development of Construction Demolition Waste-based Geopolymeric Composites Suitable for Three-dimensional Additive Manufacturing
Hacettepe Üniversitesi, Fen Bilimleri Enstitüsü, İnşaat Mühendisliği A.B.D.
2018
2018Yüksek Lisans
YAPILAR ÜZERİNDEKİ KALINTI DEPLASMAN TALEBİNİN DEPREMLE OLAN İLİŞKİSİ
Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Anabilim Dalı
Araştırma Alanları
İnşaat Mühendisliği
Yapı Malzemesi
Yapı Malzemeleri
Beton Teknolojisi
Yapı Bileşenleri ve Malzemeleri
Kompozit Malzemeler
Mühendislik ve Teknoloji
Akademik Faaliyetlere Dayalı Araştırma Alanları
Avesis Araştırma Alanları
WoS Araştırma Alanları
Scopus Araştırma Alanları
Akademik Ünvanlar / Görevler
2022 - Devam Ediyor
2022 - Devam EdiyorDr. Öğr. Üyesi
Ankara Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü
2017 - 2022
2017 - 2022Araştırma Görevlisi
Kırşehir Ahi Evran Üniversitesi, Mühendislik-Mimarlık Fakültesi, İnşaat Mühendisliği Bölümü
Yönetimsel Görevler
2022 - Devam Ediyor
2022 - Devam EdiyorBölüm Başkan Yardımcısı
Ankara Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü
Makaleler
Tümü (42)
SCI-E, SSCI, AHCI (32)
SCI-E, SSCI, AHCI, ESCI (35)
ESCI (2)
Scopus (39)
TRDizin (2)
Diğer Yayınlar (2)
2026
20261. Seismic performance of a novel viscoelastic damper for steel beam-column joints: Experimental and numerical analysis
MERCİMEK Ö., BIÇAKÇIOĞLU K., AKKAYA S. T., ÇELİK A., ŞAHİN O., Naghshineh A. K., et al.
Journal of Constructional Steel Research
, cilt.241, 2026 (SCI-Expanded, Scopus)
2026
20262. Loading rate dependent cyclic shear fatigue and damage evolution of concrete based on dynamic increase factor
Selçuk L., KAYABALI K., BEYAZ T., ŞAHİN O.
Construction and Building Materials
, cilt.522, 2026 (SCI-Expanded, Scopus)
2026
20263. Sustainable lightweight thermal insulating geopolymer mortars from end-of-life materials for 3D printing
Ekinci M. Ö., Belendir U., DEMİRAL N. Ç., ŞAHİN O., İLCAN H., ŞAHMARAN M., et al.
Construction and Building Materials
, cilt.520, 2026 (SCI-Expanded, Scopus)
2026
20264. Diagonal tension testing of 3D printed concrete walls: Benchmarking against conventional masonry
MERCİMEK Ö., AKKAYA S. T., BIÇAKÇIOĞLU K., ÇELİK A., ÖZDOĞRU E., Yıldırım F. N., et al.
Journal of Building Engineering
, cilt.121, 2026 (SCI-Expanded, Scopus)
2026
20265. Performance of 3D-printed UHPC optimized by particle packing model under standard and steam curing
Lyu P., Zhou B., Wu Z., Sinha A., Xiang B., Luo D., et al.
Journal of Building Engineering
, cilt.119, 2026 (SCI-Expanded, Scopus)
2025
20256. Valorization of low-quality recycled concrete aggregates in cement-based systems through carbonation: assessment of engineering performance
Dundar B., SÖNMEZ TUĞLUCA M., İLCAN H., ŞAHİN O., ŞAHMARAN M.
Journal of the Australian Ceramic Society
, cilt.61, sa.5, ss.1769-1784, 2025 (SCI-Expanded, Scopus)
2025
20257. Life cycle assessment of geopolymer materials utilizing construction and demolition waste
Ünsal Z., Ekinci M. Ö., İLCAN H., ŞAHİN O., Selçuk S., ŞAHMARAN M.
Environmental Research
, cilt.285, 2025 (SCI-Expanded, Scopus)
2025
20258. Utilizing bovine carbonic anhydrase II for enzyme-induced carbonate precipitation (EICP) in recycled concrete aggregate
Abdulmajeed Abdulmajeed A. T., Gokoglan H., ÖZDOĞRU E., Erdogan M. K., Yildirim F. N., ŞAHİN ABDULMAJEED S., et al.
Environmental Research
, cilt.284, 2025 (SCI-Expanded, Scopus)
2025
20259. Structural performance of pre-fabricated 3D printed concrete walls: Effect of cold joint, axial load and load type
MERCİMEK Ö., ŞAHİN O., ÇELİK A., Özkan Ekinci M., Teksin E., BIÇAKÇIOĞLU K., et al.
JOURNAL OF BUILDING ENGINEERING
, cilt.112, 2025 (SCI-Expanded, Scopus)
2025
202510. Alkali-Activated Mortars Incorporating Construction and Demolition Waste and Industrial By-products: A Fresh and Hardened State Evaluation
GÜZELKÜÇÜK S., ŞAHİN O., EREN Ş., ULUGÖL H.
GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.38, sa.4, 2025 (ESCI, Scopus, TRDizin)
2025
202511. Evaluating sustainable building strategies: Life cycle comparison of demountable and conventional built-environment structures
Khan S. A., İLCAN H., ŞAHİN O., Jassim M., Aminipour E., AKDUMAN Ş., et al.
Cleaner Environmental Systems
, cilt.18, 2025 (Scopus)
2025
202512. Out-of-plane performance of masonry wallets strengthened with FRP-reinforced prefabricated panels made from construction and demolition waste-based mortars☆
ŞAHİN O., GÜZELKÜÇÜK S., ULUGÖL H., ÖZDOĞRU E., Erdoğan M. K., AKKAYA S. T., et al.
ENGINEERING FAILURE ANALYSIS
, cilt.177, 2025 (SCI-Expanded, Scopus)
2025
202513. Mechanochemical transformation of waste bricks: A study on grinding optimization and pozzolanic activity
SÖNMEZ TUĞLUCA M., Teksin E., Taj K., ŞAHİN O., İLCAN H., GÜLCAN E., et al.
Powder Technology
, cilt.460, 2025 (SCI-Expanded, Scopus)
2025
202514. Climate Change and Its Effects on Concrete Pouring Activity: The Case of Kırıkkale
Oruc S., Guzelkucuk S., Şahin O.
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi
, cilt.17, sa.2, ss.257-271, 2025 (TRDizin)
2025
202515. A comprehensive study on the valorization of recycled concrete aggregates in 3D-printable cementitious systems
Demirbaş A. O., SÖNMEZ TUĞLUCA M., ŞAHİN O., İLCAN H., ŞAHMARAN M.
Structures
, cilt.77, 2025 (SCI-Expanded, Scopus)
2025
202516. Reinforcement and modular system for 3DCP geopolymer structures using construction and demolition waste
İLCAN H., Külak A. Y., ŞAHİN O., ALDEMİR A., ŞAHMARAN M., Lachemi M.
Construction and Building Materials
, cilt.474, 2025 (SCI-Expanded, Scopus)
2024
202417. Optimizing mechanical performance of geopolymers produced from construction and demolition waste: A comparative study of materials from different origins
KUL A., Ozcelikci E., ÖZEL B. F., İLCAN H., ŞAHİN O., Gunal M. F., et al.
Construction and Building Materials
, cilt.426, 2024 (SCI-Expanded, Scopus)
2024
202418. The impact of nozzle diameter and printing speed on geopolymer-based 3D-Printed concrete structures: Numerical modeling and experimental validation
Khan S. A., İLCAN H., Imran R., Aminipour E., ŞAHİN O., Al Rashid A., et al.
Results in Engineering
, cilt.21, 2024 (ESCI, Scopus)
2024
202419. Characterization and evaluation of cement-based systems containing solution-treated municipal solid-waste incineration fly ash
Wi K., ŞAHİN O., Wang K., Lee Y.
Construction and Building Materials
, cilt.416, 2024 (SCI-Expanded, Scopus)
2023
202320. Buildability analysis on effect of structural design in 3D concrete printing (3DCP): An experimental and numerical study
Khan S. A., İLCAN H., Aminipour E., ŞAHİN O., Al Rashid A., ŞAHMARAN M., et al.
Case Studies in Construction Materials
, cilt.19, 2023 (SCI-Expanded, Scopus)
2023
202321. Buildability analysis on squared profile structure in 3D concrete printing (3DCP)
Imran R., AL RASHİD A., KHAN S. A., İLCAN H., ŞAHİN O., ŞAHMARAN M., et al.
European Journal of Materials , cilt.3, 2023 (Hakemli Dergi)
2023
202322. Thermal conductivity and electrical resistance of carbon-based cementitious composites
Acikök F., Genç A., Sahin O., Bayer I. R., Ardoa M. K., ŞAHMARAN M.
Magazine of Concrete Research
, cilt.76, sa.4, ss.176-187, 2023 (SCI-Expanded, Scopus)
2023
202323. Effects of Treated Waste Wood Fibers Incorporation on Rheological Properties of the Construction and Demolition Waste-based Geopolymer Mortar
İLCAN H., ŞAHİN O., SÖNMEZ TUĞLUCA M., ŞAHMARAN M.
NanoWorld Journal , cilt.9, sa.2, ss.163-169, 2023 (Hakemli Dergi)
2023
202324. Effect of industrial waste-based precursors on the fresh, hardened and environmental performance of construction and demolition wastes-based geopolymers
İLCAN H., ŞAHİN O., Unsal Z., Ozcelikci E., KUL A., Cağatay Demiral N., et al.
Construction and Building Materials
, cilt.394, 2023 (SCI-Expanded, Scopus)
2023
202325. 3D printing of circular materials: Comparative environmental analysis of materials and construction techniques
Khan S. A., Jassim M., Ilcan H., ŞAHİN O., Bayer İ. R., ŞAHMARAN M., et al.
Case Studies in Construction Materials
, cilt.18, 2023 (SCI-Expanded, Scopus)
2023
202326. The effects of various operational- and materials-oriented parameters on the carbonation performance of low-quality recycled concrete aggregate
Dündar B., Tuğluca M. S., İLCAN H., ŞAHİN O., ŞAHMARAN M.
Journal of Building Engineering
, cilt.68, 2023 (SCI-Expanded, Scopus)
2023
202327. Construction and demolition waste-based self-healing geopolymer composites for the built environment: An environmental profile assessment and optimization
Mir N., Khan S. A., KUL A., ŞAHİN O., Ozcelikci E., ŞAHMARAN M., et al.
Construction and Building Materials
, cilt.369, 2023 (SCI-Expanded, Scopus)
2023
202328. Rheological property and extrudability performance assessment of construction and demolition waste-based geopolymer mortars with varied testing protocols
Ilcan H., Şahin O., Kul A., Ozcelikci E., Sahmaran M.
CEMENT AND CONCRETE COMPOSITES
, cilt.136, ss.1-15, 2023 (SCI-Expanded, Scopus)
2022
202229. Assessment of the long-term photocatalytic performance of cementitious systems incorporating different mineral admixtures
ŞAHİN O.
Construction and Building Materials
, cilt.354, 2022 (SCI-Expanded, Scopus)
2022
202230. Mechanical anisotropy evaluation and bonding properties of 3D-printable construction and demolition waste-based geopolymer mortars
Demiral N. C., Ekinci M. O., ŞAHİN O., İLCAN H., KUL A., YILDIRIM G., et al.
CEMENT & CONCRETE COMPOSITES
, cilt.134, 2022 (SCI-Expanded, Scopus)
2022
202231. Renewable energy for carbon footprint reduction of green geopolymers material's production for built-environment
Khan S. A., Mir N., KUL A., ŞAHİN O., ŞAHMARAN M., Koc M.
ENERGY REPORTS
, cilt.8, ss.852-858, 2022 (SCI-Expanded, Scopus)
2022
202232. Energy-environmental performance assessment and cleaner energy solutions for a novel Construction and Demolition Waste-based geopolymer binder production process
Khan S. A., Kul A., Şahin O., Şahmaran M., Al-Ghamdi S. G., Koç M.
Energy Reports
, cilt.8, ss.14464-14475, 2022 (SCI-Expanded, Scopus)
2022
202233. Life cycle assessment of construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing
MIR N., KHAN S. A., KUL A., ŞAHİN O., ŞAHMARAN M., KOÇ M.
CIRUGIA ESPAÑOLA (ENGLISH EDITION)
, cilt.10, 2022 (Scopus)
2022
202234. Life cycle assessment of binary recycled ceramic tile and recycled brick waste-based geopolymers
Mir N., Khan S. A., KUL A., ŞAHİN O., Lachemi M., ŞAHMARAN M., et al.
Cleaner Materials
, cilt.5, 2022 (Scopus)
2022
202235. Rheological properties and compressive strength of construction and demolition waste-based geopolymer mortars for 3D-Printing
İLCAN H., Sahin O., KUL A., YILDIRIM G., ŞAHMARAN M.
CONSTRUCTION AND BUILDING MATERIALS
, cilt.328, 2022 (SCI-Expanded, Scopus)
2022
202236. Role of inclusion size distribution of titanium dioxide on the nitrogen oxides reduction capability and microstructural characteristics of cementitious systems
Bahsi E., Sahin O., İLCAN H., UZAL B., Gunal M. F., YILDIRIM G., et al.
CONSTRUCTION AND BUILDING MATERIALS
, cilt.318, 2022 (SCI-Expanded, Scopus)
2022
202237. Construction and demolition waste-based geopolymers for built-environment: An environmental sustainability assessment
MIR N., KHAN S. A., KUL A., ŞAHİN O., ŞAHMARAN M., KOÇ M.
MATERIALS TODAY : PROCEEDINGS
, cilt.70, ss.358-362, 2022 (Scopus)
2021
202138. Construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing
Sahin O., İLCAN H., Atesli A. T., KUL A., YILDIRIM G., ŞAHMARAN M.
CEMENT & CONCRETE COMPOSITES
, cilt.121, 2021 (SCI-Expanded, Scopus)
2021
202139. Influence of mixing methods on the NOx reduction capability and electrical properties of photocatalytic cementitious systems
Sahin O., Bay S., Ilcan H., Yildirim G., ŞAHMARAN M.
CEMENT & CONCRETE COMPOSITES
, cilt.115, 2021 (SCI-Expanded, Scopus)
2020
202040. Effects of Mixture Design Parameters on the Mechanical Behavior of High-Performance Fiber-Reinforced Concretes
ERDEM T. K., DEMİRHAN S., Yildirim G., Banyhussan Q. S., Sahin O., Balav M. H., et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING
, cilt.32, sa.12, 2020 (SCI-Expanded, Scopus)
2020
202041. Performance of engineered cementitious composites under drop-weight impact: Effect of different mixture parameters
Yildirim G., Khiavi F. E., ANIL Ö., Sahin O., ŞAHMARAN M., Tugrul Erdem R.
STRUCTURAL CONCRETE
, cilt.21, sa.3, ss.1051-1070, 2020 (SCI-Expanded, Scopus)
2019
201942. Electrical Testing for the Assessment of Self-healing and Self-sensing Capability of Cementitious Composites
ŞAHİN O., YILDIRIM G., ŞAHMARAN M.
INDIAN CONCRETE JOURNAL
, cilt.93, ss.39-46, 2019 (Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2024
20241. Fire Resistance Properties of Geopolymer Binders Incorporating Construction and Demolition Waste and Slag
ULUGÖL H., GÜZELKÜÇÜK S., ERDOĞAN M. K., ŞAHİN O.
2nd International Symposium on Innovations in Civil Engineering and Technology, Isparta, Türkiye, 30 Ekim - 01 Kasım 2024, (Tam Metin Bildiri)
2023
20232. İNŞAAT VE YIKINTI ATIKLARININ YÜKSEK KATMA DEĞERLİ OLARAK İNŞAAT SEKTÖRÜNE YENİDEN KAZANDIRILMASI
Şahmaran M., İlcan H., Şahin O.
2023 HAZIR BETON FUARI VE KONGRESİ, İstanbul, Türkiye, 8 - 10 Kasım 2023, ss.1-5, (Tam Metin Bildiri)
2023
20233. Investigating the Effects of Chemical Waterproofing Agent Application Techniques on the Permeability of Concrete Specimens
ŞAHİN O.
3rd Global Conference on Engineering Research (GLOBCER'23), Türkiye, 13 - 16 Eylül 2023, ss.532, (Özet Bildiri)
2023
20234. Investigating the Influence of TiO2 Substitution Rate on Photocatalytic Activity of Cement-Based Systems
ŞAHİN O.
11th International Congress on Engineering, Architecture and Design, İstanbul, Türkiye, 10 - 12 Haziran 2023, ss.1453, (Özet Bildiri)
2023
20235. Investigation of the Properties of Geopolymer Mortars Produced with the Construction and Demolition Waste
İLCAN H., ŞAHİN O., AMİNİPOUR E., ŞAHMARAN M.
The International RILEM Conference on Synergising expertise towards sustainability and robustness of cement-based materials and concrete structures (SynerCrete'2023), MILOS, Yunanistan, 14 - 16 Haziran 2023, cilt.44, ss.337-349, (Tam Metin Bildiri)
2023
20236. Effects of Treated Waste Wood Fibers Incorporation on Rheological Properties of the Construction and Demolition Waste-based Geopolymer Mortar
İLCAN H., ŞAHİN O., SÖNMEZ TUĞLUCA M., ŞAHMARAN M.
4th International Congress on Materials & Structural Stability (CMSS2023), Rabat, Malta, 8 - 10 Mart 2023, (Tam Metin Bildiri)
2022
20227. Effect of Light-source on the Photocatalytic Degradation Capability of TiO2-incorporated Cementitious Composites
ŞAHİN O., HATEM M., Bahşi E., BAYER İ. R.
4th International Conference on Advanced Engineering Technologies (ICADET 2022), Bayburt, Türkiye, 28 - 30 Eylül 2022, ss.200, (Özet Bildiri)
2022
20228. Utilization of Calcined VolcanicTuff in the Production of Geopolymer Composites
ÖKSÜZER N., HATEM M., ŞAHİN O.
4th International Conference on Advanced Engineering Technologies (ICADET 2022), Bayburt, Türkiye, 28 - 30 Eylül 2022, (Özet Bildiri)
2022
20229. Characterization of Fresh State Properties of Construction and Demolition Waste-based Geopolymer for Numerical Modelling and Simulation
İLCAN H., KHAN S. A., ŞAHİN O., KOÇ M., ŞAHMARAN M.
The 4th International Conference of Materials and Engineering Technology, Türkiye, 8 - 10 Eylül 2022, (Özet Bildiri)
2021
202110. The buildability performance of construction demolition waste-based geopolymeric binder
ŞAHİN O., KUL A., YILDIRIM G., ŞAHMARAN M.
International Conference on Cement - Based Materials Tailored for a Sustainable Future, İstanbul, Türkiye, 27 Mayıs 2021, cilt.1, ss.376-388, (Tam Metin Bildiri)
2019
201911. Sürdürülebilir Yapılaşma Çerçevesinde 3 Boyutlu Eklemeli Beton İmalatı” International Conference on Innovation
ŞAHMARAN M., Bahşi E., ŞAHİN O.
Sustainability, Technology and Education in Civil Engineering, 13 - 15 Haziran 2019, (Tam Metin Bildiri)
2018
201812. Maksimum Deprem Parametrelerinin Yapıların Kalıntı Deplasman Talepleri Üzerindeki Etkisi
ŞAHİN O., DURUCAN C., AY Z.
II. International Scientific and Vocational Studies Congress, Nevşehir, Türkiye, 5 - 08 Temmuz 2018, (Özet Bildiri)
Kitaplar
2022
20221. Nano-tailored TiO2-based photocatalytic cementitious systems for NOx reduction and air cleaning
ŞAHİN O., Bahşi E., YILDIRIM G., ŞAHMARAN M.
Recent Advances in Nano-Tailored Multi-Functional Cementitious Composites, , Editör, Woodhead Publishing Series in Civil and Structural Engineering, ss.161-208, 2022
Desteklenen Projeler
2022 - 2025
2022 - 2025Mineral katkılı çimento esaslı harç malzemelerinin performans özelliklerinin üretim sonrası ilave uygulamalar yoluyla iyileştirilmesi
Yükseköğretim Kurumları Destekli Proje , BAP Güdümlü
ŞAHİN O. (Yürütücü), ULUGÖL H.
2022 - 2025
2022 - 2025Yüksek Verimli Jeopolimer Bağlayıcılı Sistemler Için Mekano-Kimyasal Aktivasyon İşlemi Ile Düşük Aktiviteli Mineral Katkıların Mikroyapısal Özelliklerinin İyileştirilmesi
TÜBİTAK Projesi , 1001 - Bilimsel ve Teknolojik Araştırma Projelerini Destekleme Programı
Şahmaran M.(Yürütücü), Şahin O., Uzal B., Gülcan E.
2022 - 2025
2022 - 2025Viskoelastik Sönümleyicili ve Bulonlu Çelik Kolon Kiriş Birleşimlerinin Deprem Yüklemesi Etkisindeki Davranışının Deneysel Olarak İncelenmesi
Yükseköğretim Kurumları Destekli Proje , BAP Güdümlü
MERCİMEK Ö. (Yürütücü), ŞAHİN O.
Kongre ve Sempozyum Katılımı Faaliyetleri
09 Kasım 2023 - 10 Kasım 2023
09 Kasım 2023 - 10 Kasım 2023Iowa Better Concrete Conference
Davetli Konuşmacı
Iowa-Amerika Birleşik Devletleri
Burslar
2023 - 2023
2023 - 2023